If your newly built computer won’t display, the first thing you need to do is check your display connection.
If there is some dispute while configuring your system, then you might face these kinds of troubles.
Otherwise, the motherboard or the processor may raise the issue. Graphics card is another thing that you need to check.
There are many other issues related to your BIOS memory and even the Monitor.
Whatever the reason of the problem may be, through this article I am going to explore some solutions to resolve the issue.
Also read: What To Do When Your Computer Won’t Boot Past BIOS!
What To Do If Newly Built Computer Won’t Display?
I have mentioned above the reasons that cause newly built computer won’t display issue.
To address the problem, you will have to check your monitor first by connecting it to another PC.
Check so that the power cable is properly connected. If the CPU or mother board by any chance are damaged make sure to get a fresh set first.
Also check that the BIOS memory is clear, and the placement of RAM is proper. Now let us discuss the methods in detail through this article.
Method 1: Check The Power Cable
It is very necessary to check the power cable as it may not be properly plugged in during the configuration of your new Computer.
Due to this, you may face the new computer won’t display on monitor issue.
So, it is always advisable that before you try to find out any other cause, first check whether the power cable is properly connected to your device and then switch on the Computer properly.
Another process you can try is to disconnect all the peripherals and plugs attached and press hold your power button for 30—40 seconds. Now this will help you by removing all the charges.
Method 2: Check Your Monitor
Sometimes there may be some problem related to the Monitor when your computer wont display.
So, make sure it is properly compatible with your system. You can also disconnect it and check it in another PC for ensuring that it has no in-built problem and is in proper working condition.
You can also disconnect it from your newly configured PC and keep connected to the source of power for checking it.
Method 3: Clear BIOS Memory
Clearing the BIOS memory is another option that I may suggest you follow for fixing up the problem when your newly built computer is not turning on.
So, try to clear the BIOS memory for fixing the problem. For executing the task, you will have to disconnect the Computer from the power outlet.
Now, open your PC case for removing the motherboard battery.
Now leave it like this for at least 10-15 minutes before you insert the battery back. After you have done so, give your Computer a fresh restart.
Method 4: Check The Source Of Power
In case you have plugged in your device into a surge protector having the circuit breaker, check that it has not got tripped.
In case you are not having the circuit breaker, it might get burnt out.
If somehow that got damaged, you will have to do some resetting of the circuit breaker, or you may just need to change the surge protector & circuit breaker.
Finishing all these, plug back your computer into its source of power. After doing this check whether your system works fine now.
Method 5: Check The Fans
It may happen that when you turn on your system and see that the fan is not turned on, then there might be some problem with the power supply.
It may also indicate that something is damaged, and you may need to change the whole case along with the power supply system.
Sometimes the problem may be with the motherboard if you see that the fan has not turned on.
If this is the case then you may have to replace the CPU along with your motherboard but first, make sure you have checked thoroughly.
If you find that the drives are running with the CPU being off, then it is definite that the CPU, motherboard, or other important elements got damaged during the power outage.
This might create a whole mess and you have no other option left but to change the entire system.
Method 6: Check The Placement Of RAM
Minutely check if the RAM is properly placed in correct manner. You can try one thing that is to disconnect your RAM turn your PC on once again and check.
Check whether you get a beep sound from the motherboard. This beep suggest that the motherboard is in proper condition.
Now try wiping the RAM connections carefully using a clean cloth or wiper. After you have properly cleaned it, insert it back once again.
In case you cannot hear any beeping sound, then there is something wrong with the motherboard. At this time you need to consult an expert for handling the matter.
Method 7: Check The CPU
It is another necessary step to check the heat sink of the CPU you are using for your newly built computer. For this follow the simple process mentioned below:
Step 1: First of all, open the case of your PC. Now remove the CPU fan. Check it properly so that the heat sink is in proper order.
Step 2: If you find that it is heated, then it is advisable to apply another coat of thermal paste.
Step 3: If not, you might be required to apply a fresh coat of thermal paste for ensuring that the CPU remains cool.
Method 8: Reseat The Graphics Card
The problems with the physical hardware of your graphics card may trigger the issues.
In case you have a desktop computer, reseat the graphics card. For this, unplug all the cables attached to your system.
Carefully disconnect your computer from the power. Now, open the side of your computer and remove your graphics card from the PCI Express slot.
Make sure you clean the dust from the inside of your system and then plug your graphics card back in.
Reseat the graphic card firmly into the PCI Express slot and check that the latches are secured.
Winding Up
Hope by now, you can find out a suitable solution for newly built computer won’t display issue.
If you still have queries related to this issue or any other folder, please communicate in the comments section provided below.
Feel free to shoot us a mail with your ideas or suggestions. We always look forward to hearing back from you.