How To Clean PS4 Slim? [Complete Guide]

Recommendation: Click here to fix Windоws issues and optimize system performance

If your PS4 is getting slow or the fan is spinning louder, it’s time that you should clean your PS4 controller.

If you are muddling how to clean PS4 slim just check this article out for the proper guideline to accomplish the task.

All you need to do is clean the heat sink, fan occasionally and remove the accumulated dust from your system.

How To Clean Your PS4 Slim

Table of Contents

After some time, your PS4 may accumulate dust and you will experience an overheated & risky device.

So, you must take care of cleaning PS4 for maintaining them on regular basis.

This is a vital step for the longevity of your PS4. In today’s article, I am going to provide you the details of how to clean PS4 slim.

Preparation For Cleaning PlayStation 4

For cleaning your PS4 there are some basic preparations that you need to make.

It is your first and foremost duty to keep all the devices and gadgets you use clean.

Before we discuss how to clean PS4 slim, you must back up all your important data and this will prevent any data loss during the procedure.

Assemble the following things for cleaning your PS4:

Piece of cloth.

Cotton swabs.
A couple of brushes and toothbrushes.
A can of compressed air.

Screw Drivers.
Knife and some other sharp objects.
Flashlight.

Turn The Console Off

Initially, for PS4 cleaning you will have to switch off your PS4 console and remove all the plugs.

Check that no electricity is running before you commence to clean your PS4.

You will be then able to access the heat sink and thoroughly clean the device. For cleaning the inside of the console, you will have to open it and proceed.

Open The PS4 Console

With the help of the screwdrivers, you may open your PS4 console. Just face the backside of the console and flip upside down. You will find three stickers here that you will have to remove.

You may do that with the help of a knife or some sharp object.

You will have to keep it on a flat, smooth, and clean surface. The latest iterations will not require any tool for cleaning the fan.

Then take off the cover and check that you are careful enough to be gentle with the device.

Clean The Console

Now, this step is going to give you the answer to how to clean a PS4 controller.

You will have to use compressed air for blowing away the dust from your console.

You will have to the can in an upright position and just pay attention to the tip.

There is moisture in the can and when you hold it upright, the moisture does not ooze out.

The canned air will blow away the dust and with the help of the flashlight check the corners so that there is no dust left at the corners.

You may take the help of the cotton swabs in case the air fails to reach the places having dirt.

You will have to stay focused on the fan, the outer edges, and the heat sink.

These are the common locations where dust accumulates the most. Check these few things while you clean:

You should not hold the can upside down. This will force the liquid to come out.

Make sure that you do not press the air directly on the fan as this may damage the circuit.

Before blowing air into the fan jam the fan with some cotton swab or something.

Remember not to breathe in the air so, be cautious and wear a mask before you commence the task.

Cleaning PS4 Slim And PS4 Pro

For PS4 cleaning you will not have to remove the stickers. You will also not have much trouble removing the cover.

Just pull up the corners and then slide the cover back. Check if the fan seems to be dirty with the help of your flashlight.

Now you will have to spray the canned air into the fan and before that, you must stop the spinning of the fan as I have told you before with the help of some cotton swab.

To properly clean you will have to remove the screws and the cover.

PS4 Pro is going to give you much less trouble as it is simple and easy.

The heat sink is deep down inside and for this reason, you need to disassemble the entire console. So, you may just only clean the fan.

Reassemble PS4

After you have successfully cleaned the PS4, this is the time for reassembling the console.

Put everything back together after that. Start flipping the power supply and then put that back in the place.

There will be two prongs on the left bottom side. Check that those are lined up with the gap in the PSU. Next put back the screws in.

Swap back the cover in place and then press down all around the edges and that should not wiggle.

In case you have secured the stickers, replace them.

Check Your PS4

Your PS4 is all clean and set now. When you run it, it will run quietly without making much noise.

If you dig deep into the system and clean it, there are chances that you cause damage.

You should take care that the dust is not building up further. Check that the console has enough space to breathe and also check that the console does not get overheated.