If your Ethernet port in the wall isn’t working, it can be frustrating and disheartening.
The ethernet port in the wall provides a reliable and fast connection and also acts as a hardwired link between your device and your router.
So, if you don’t have internal ethernet cable wiring then this guide is for you.
Here, I will discuss in detail how to run an ethernet cable through walls.
Also read: Do Ethernet Cables Have Different Speeds?
How To Fix Ethernet Port In Wall Not Working Issue?
Ethernet ports are a great way to connect computers, servers, and other devices to a wired network and are much faster than Wi-Fi.
Here, I have discussed some of the potential fixes:
1) Check For Power
Make sure the power is on, and everything is perfect with the wiring.
Check whether the cables are securely connected and are not damaged in any way.
2) Unplug And Then Plug Back
You can also try unplugging and then plugging it back in for each of your cables.
Also, check whether any loose cables or wires are being disconnected from the port itself.
3) Check For Connections
It is essential to double-check the connection status too.
See whether the ports are secure and not loose or damaged in any way.
Check for damaged and loose cable connections also.
4) Check Network Settings
If the network connections are secure, you need to look at your network settings too.
All the devices need to be connected to the same network, but if you notice any accidental changes in the Settings menu, reset your router or modem.
How Does An Ethernet Port In The Wall Work?
The ethernet port is installed in the walls of your home or office to provide an easy way for the users to plug in a network cable in order to connect to the internet.
The port comprises two main connectors, namely RJ45 connectors- one on the wall and the other on the end of the cable that is being connected via an 8-pin connector.
The most advantageous part of using an ethernet wall port is that it provides a more secure connection in comparison to Wi-Fi.
How Can You Run Ethernet Cable Through Walls?
The steps of running an ethernet cable through a wall are universal.
Those are as follows:
Step 1: Make A Rough Wiring Plan
You can use software or online tools for drawing wiring plans.
Identify the cable path and go through the gap in the walls.
If you have any blueprints of your house, then use that for estimating the length of the cable.
Step 2: Set Up The Distribution Point
The distribution point is the place where all the ethernet cables terminate.
This is the location where you keep your modem or router.
Step 3: Cut Or Drill Holes To Run Ethernet Cables
It entirely depends on your house and the requirements for making holes in the walls, floor, or ceiling.
It would help to start with a hole above the distribution or the network panel.
Also, make the necessary holes for attaching the ethernet wall sockets.
Step 4: Feed The Wires Through Holes Or Walls
After you have made all the holes, you can now start feeding all the cables through the walls and holes.
Also, make sure you label the cables to eliminate confusion.
Step 5: Terminate The Cables
After you run all the cables through the holes and walls, you can start crimping the cables.
Wire the cables at the ethernet wall sockets and then use the cable ties or Velcro Straps to secure the cables.
What Are The Pros Of Running Ethernet Ports On Walls?
Here are the pros of running ethernet ports in walls:
- Increased Safety
- Future Proofing
- Increased Flexibility
- Improved Performance
- Durability
- Organization
- Aesthetics
How Do I Enable My Ethernet Port?
The router, modem, or both must be connected to the ethernet cable via a wall jack.
Here are the tips for enabling your ethernet port:
- You need to identify a convenient location for the jack before building an ethernet outlet from scratch.
- Search for the ethernet outlet with the help of a wall plate mounting bracket.
- Turn off the electricity and follow the wall outline before cutting into the wall.
- The internet equipment should be connected to the wall jack.
- Remove two inches from the outer sheath and then attach the wired connector head to the faceplate of the ethernet jack.
How Can You Install An Ethernet Port On The Wall?
An ethernet port on the wall can be easily installed by taking the help of someone with good electrical work knowledge.
With the right tools and instructions, installing an ethernet port on the wall can also be cost-effective and rewarding.
I am giving below the details on how to do that:
- Gather The Essential Supplies
- Cut Hole And Secure Outlet Box
- Connect Your Wiring From Your Router Or Modem And Then Test The Connection
- Connect The Outlet Box And Secure The Cover Plate
Why Is My Ethernet In The Wall Not Working?
These are the factors that are responsible for not getting internet even if you have a wall-mounted ethernet cable:
- The conductors in the RJ-45 port may have been damaged.
- Make sure the wires of the jack are working properly since loose wires with hinder the operation of the jack.
- Damaged ethernet cable.
- Poorly wired socket.
- Problematic patch panel.
- The cable isn’t plugged in the right way.
Frequently Asked Questions (FAQs)
1. What Is Ethernet In The Wall Called?
It’s called an RJ45 jack or simply a data jack.
2. How Do I Know If My Ethernet Port Is Working?
If your ethernet port is working, the ethernet connection should have a green indicator and display “Connected.”
3. What Do The Lights On The Ethernet Port Mean?
The orange LED light indicates the port is connected, but no data is being transferred.
But when it blinks, it indicates the data is being transferred.
And when the orange LED is off, no data is transferred.
Final Words
If there are still any underlying concerns regarding this topic, then feel free to get in touch with us in the comment section below.
