Application Was Unable To Start Correctly (0xc0000005)

Recommendation: Click here to fix Windоws issues and optimize system performance

Windows 10 launched with lots of modifications erasing the problems of the previous version, yet some issues may occur now and then.

While opening a different browser or software inside your Windows 10, you may encounter the application was unable to start correctly (0xc0000005) error message.

This happens not only to the browsers, but any application may stop responding because of this error while you are inside the Windows.

We have shown a VIDEO walk through at the end of the post for easy solution.

Causes That Triggers The Application Was Unable To Start Correctly (0xc0000005) Error Message

Table of Contents

In Windows 10, various reasons may cause this error message to stop the applications. The files that you are executing may have some conflict with some third-party antivirus.

Often the Windows updates may fix the technical glitches or bugs instantly, so always make sure that you have the latest updates.

Sometimes the registries may get bugged and cause the programs to get abnormal. The corrupted hardware drivers may also trigger the problem as well.

Whatever reason may cause the error, let us explore to find some quick remedies to address the problem through this article.

Solution 1: Use Command Prompt To Repair BCD

This solution has worked wonders for some users to fix the problem. You may repair the BCD and give it a try to fix the annoying issue.

Follow the steps mentioned below to accomplish the task:

Step 1: Run Elevated Command Prompt and enter bcdedit. Then hit the Enter button.

Step 2: In case xOsload.exe is your bootloader path, repair the BCD by removing some files.

Step 3: When you get done, type the commands given below and press Enter after each one.

del D:\Windows\System32\xOsload.exe

del D:\Windows\System32\xNtKrnl.exe

del D:\Windows\System32\Drivers\oem-drv64.sys

attrib c:\boot\bcd -h -r -s

ren c:\boot\bcd bcd.old

bootrec /rebuildbcd

After you finish this entire process, re-activate your Windows.

Solution 2: Check Your Drivers

The corruption in the drivers may cause the issue of the application was unable to start correctly (0xc0000005).

Sometimes your drivers may be out of date and need an update. So, remember to re-check your drivers as this can cause you a lot of problems with your system.

Besides having a problem while working on windows 10, drivers can generate other problems too.

Step 1: First of all, you need to go to the Device Manager or Windows Update and check if there is any yellow marked hardware.

Step 2: If you find the yellow mark, right-click on it, and then proceed for updating driver software. In case you have updated then in the recent past, update them too.

Step 3: Check for any automatic update of driver software and get them installed. Sometimes you may have manually downloaded those drivers.

You may also take the help of a third-party tool for downloading and installing the drivers instantly.

Now check whether your driver is compatible with your system and you can continue with your work smoothly.

Solution 3: Fix The Registries

This central database of your Windows helps your PC to read the files and settings to run.

There may be corruption in the registry because of some damages files. Always make a back-up of the registry and restore it in s USB stick so that you can easily access it.

So, fixing the registry may be an answer to the application unable to start correctly 0xc00000e50xc0000005 error.

Solution 4: Update Your Windows

For fixing the technical glitches and bugs, windows update always proves to be one of the handiest solutions.

For some users, after they chose to update their windows, their problem got solved instantly. To update the Operating system, follow the steps mentioned below:

Step 1: Go to Windows settings and open Updates and Security.

Step 2: From there select Windows Update. Check for the current updates available and next hit the download and installation options for the new updates.

When you have finished the updating, check whether this has addressed the annoying issue with the application was unable to start correctly (0xc0000005).

Solution 5: Disable the Antivirus Program

The third-party antivirus program can cause hazards to the files and programs that you wish to execute.

Thus, your antivirus protection interferes with the other applications you have installed. It will prevent the apps from running. To combat the issue, you need to disable the antivirus program.

For the time being, block the antivirus software to provide an easy remedy to the application was unable to start correctly 0xc00005 windows 10 error. After doing so, check if this error is fixed this way.

Solution 6: Enable Firewall

The application that has triggered the issue may be suspicious, and check that the Firewall is enabled on your PC.

Enabling Windows Firewall if it is somehow disabled may check the issue.

So, follow the given steps to execute the process:

Step 1: Open the Control Panel. Now, when from the given options, check that the View By Option is selected to Large Icons option.

Step 2: If not, make the selection and then choose Windows Defender Firewall.

Step 3: Now choose the Turn Windows Defender Firewall On or Off option and turn it on.

Step 4: After finishing the process, save the changes made and close the window. Check whether this way you could check the application was unable to start correctly (0xc0000005) error.

Solution 7: Restore Your PC

Sometimes the faulty installation of the drivers may cause the error. Check for such installations and any rogue application installed recently on your PC.

Follow the steps mentioned below and restore your Computer to revert to the original state.

Step 1: Open the Run Command and enter rstrui. After that hit the Enter button.

Step 2: After you entered the retore management window, press Next & see Show more Restore Points option.

Step 3: Now choose a restore point from the provided list and hit the Next button.

Step 4: Meticulously follow the instruction provided on screen and check whether you can resolve the issue.

Solution 8: Disable the DEP

Some programs get restricted by the Data Execution Prevention (DEP) running on your PC as it may suspect for any malware.

Because of this, you may sometimes encounter the said issue. To find a solution to the problem,

Follow the steps mentioned below to disable the Data Execution Prevention.

Step 1: Go to the Control Panel and then select System from the displayed options. Then move on to the Advanced System Settings.

Step 2: Now choose the Advanced Tab and under the Performance option proceed to choose Settings.

Step 3: Now move on to the Advanced Settings option. From the next options displayed, choose the Data Execution Prevention option.

Step 4: After that choose Turn On DEP For All Programs Except Those I Select a category.

Choose Add and then point towards the application which is creating the issue.

After accomplishing the entire task, check whether your issue is solved this way.

Solution 9: Initiate a System File Checker Scan

This is probably the last option I recommend getting rid of the error. Try to mend a few system files with the help of the System File Checker utility in Windows.

This system repairs the corrupted system files so, you can run a scan to fix the file to come out of the issue:

Step 1: Navigate and then select the Cortana button on the Windows 10 taskbar. Then enter cmd in the search box and open elevated Command Prompt.

Step 2: First, type: DISM.exe /Online /Cleanup-image /Restorehealth in the Prompt to run the Deployment Image Servicing tool. Then press Return.