What To Do When Sony TV Can't Connect To Wi-Fi?

The old-fashioned tube only needed a good cable connection to work while a Smart TV is not considered smart if it doesn’t have an Internet connection.

Sometimes you may be interrupted when Sony tv won’t connect to Wi-Fi because of this internet issue.

This will hinder your apps from loading, movies will buffer, you fail to upload you favourite music and generate other unwanted issues.

How To Fix If Sony TV Not Connecting To Wi-Fi?

Table of Contents

Here below we have mentioned the ways to fix if Sony Tv is not connecting to WIFI. If you have any issues feel free to comment in the comment section.

Common Network Issues

The reason why Sony smart tv won’t connect to Wi-Fi may be connection issues with your service provider or the use of multiple devices at the same time.

Sometimes you may have accidentally entered a wrong password, the router may be at a long distance from the device or there may be disturbances created by other wireless devices.

Whatever the reason may be, this article will provide you complete guidance to fix the burning issue. Let’s follow the workarounds provided:

Solution 1: Check The Signal Strength

While using Wi-Fi, always remember to check that the distance between the router and your device.

This may be an important factor to consider is another factor to consider if Sony TV won’t connect to Wi-Fi.

When streaming video or listening to your favorite audio, to maximize your viewing experience, check that the router is placed nearer to your device.

The distance should not be more than 25 feet between them. If you have an option, install both devices in a location without any obstacle in between them.

You may also encounter poor signal strength due to other wireless devices like -Bluetooth speakers, microwave ovens, wireless phones, and devices sending radio frequency.

Solution 2: Check Your Network Status

Check that your device is connected to your network with proper internet access so that you can enjoy your streaming services.

Make sure you verify the network status of your device and check that it’s connected to your network.

Here we provide a proper guideline to navigate the menu and check the manuals for details.

Step 1: On the remote control provided, press the HOME or the MENU button.

Step 2: Then select Settings and go to Network or Network & Internet.

Step 3: Now move on to Network Status, or Advanced settings and View Network Status. This will display your connection information. If you need any further information, choose the Check connection.

Solution 3: Power Reset Your Modem/Router

You can fix the issue when Sony smart TV can’t connect to Wi-Fi by performing a power reset. In case you have a separate modem and router, power resets both the devices to solve the problem effectively.

Step 1: Remove the plug of the modem/router and wait about a few minutes.

Step 2: Now, reconnect the power to your modem/router and check whether it is turned on properly.

Step 3: Have the patience to wait until the device gets properly connected to the internet and your network.

Finally, check your network status.

Also, check the internet connection on your other devices as well to get a proper connection. If you still receive poor connection, contact your internet service provider for help.

Solution 4: Power Reset Your TV

Try a power reset for your TV. Select your TV type – Android or LCD version to perform a power reset task.

Follow the instructions provided below and hope these will fix your issue if sony tv can’t connect to wifi:

Step 1: Hold the remote control and point it to the illumination LED and press and hold the POWER button of the remote control for about 5 seconds.

Step 2: Now you will get a message to Power off. The TV will restart automatically after reboot. Wait for a minute, as the TV gets to turn back on.

Step 3: If the Tv does not get on, press the POWER button on the remote control to turn on the TV. This completes your TV reset.

Step 4: If the problem persists, unplug, and plug the power cable. Remove the power cord and keep the TV disconnected for some time.

This way, unnecessary data and error information in the memory will return to their defaults. Connect the cord again and this way you will get rid of the problem.