How To Establish Windows 10 Remote Access? [EASY GUIDE]

Sometimes you may be at home or out for a vacation and need to access your device. You can work from anywhere with your Windows 10 remote access.

Windows 10 remote access is a much effortless process to enable you to connect to another device, but the configuration is dependent on the network you are using. You may be dependent either on your local internet service or the internet.

Always make sure to give a strong password and disable the remote access when not needed as it may welcome some malicious unauthorized access to your device.

Enabling Windows 10 Remote Access

Table of Contents

While you are trying to get remote access using the local network, make sure that your computer gives you the provision for the purpose.

You can easily get access with the help of your Control Panel or the Settings app.

Through this guide, I will provide you the detailed information for Windows 10 remote access.

We have shown a VIDEO walk through at the end of the post for easy solution.

Method 1: Using the Control Panel:

You can use your Windows 10 home remote desktop alternative using the Control Panel. To enable the remote connections, follow the steps mentioned below:

Step 1: First of all, go to the Control Panel and open the System window.

Step 2: Now open the Remote Settings option under this System section.

Step 3: After selecting the Remote Settings option, check whether you have allowed Allow Remote Connections To This Computer.

Step 4: Next hit the OK option and then click Apply to apply your progress. After you finish the steps, your remote connection will be allowed on your Computer.

Method 2: Using The Settings Option:

You are allowed to enable free remote desktop windows 10 from Settings with just a few clicks. To execute the process, follow the steps provided:

Step 1: First of all, go to Settings and then open Systems.

Step 2: Your system window will get displayed now. Scroll down and find the Remote Desktop option. Once you find the option, turn it on.

Step 3: Finally hit to confirm the option and this way you will be able to enable the remote connection easily.

A. Enabling Remote Connections On Router

In case you are using internet, connection and wish for remote controller windows, configure your router.

Here I am going to describe the process that will require the IP address to get access to the computer you wish to connect to.

1. Configuring The IP Address

From the DHCP server, computers get the assigned IP address (router), which is always subjected to changes.

When you often need to get access to the remote computer, we suggest you make some changes in the static IP address for avoiding reconfiguring the port when your device gets a new address.

For the configuration of a static IP address, you can use the Control panel. Follow the steps provided below to do it:

Step 1: Open the Control Panel and select Network and Sharing Center option.

Step 2: next from the left pane, choose the Change Adapter Settings option, and right-click on the active adapter.

Step 4: Then go to the Properties option and from there choose Internet Protocol Version 4 (TCP/IPv4).

Step 5: Now you are required to provide a proper local IP address apart from your local DHCP for preventing address conflicts.

Step 6: Make sure that a sub net mask should be specified. The system automatically fills the information considering the IP address provided earlier.

Step 7: Specifically mention the gateway address of the router in the Preferred DNS Server category under the Use The Following DNS Server Addresses option.

In most cases, the address for the DNS server is also the address of your router.

Step 8: After you have finished, hit OK to confirm the changes made.

This way the new configuration made, will get applied and the settings for the IP will not change.

2.Determining The Public IP Address

You will be needing the address given by the Internet Service Provider.

To get the IP address to get access to the device over the internet, follow the steps described as under:

Step 1: Open the web browser and then search for What Is My IP.

Step 2: From the first option provided, confirm your IP address.

Please note here that for the residential customers, the internet providers give public IP address, that suggests that the public IP address is subjected to changes.

3.Forwarding Port On The Router

For forwarding a port on the router, follow the steps:

Step 1: Open Command prompt. Then enter ipconfig and then hit the Enter button.

Step 2: Now, under IPv4 Address, confirm the address of the device.

Then go to the Default field and confirm the address of the device gateway.

Step 3: Open the web browser and enter the IP address and then hit the Enter key.

Step 4: Make sure you sign in using the proper username and then the specific password.

Now go to the Port Forwarding Settings option and make sure that the Port Forwarding Service option is enabled.

Step 5: From the options, choose Add Profile. Provide a fresh port forward and give the following information:

Service Name, Protocol, External Port, Internal Port, Internal IP Address, give the specific IP address.

After you have finished doing do, hit the OK button to save the changes

Now you will find the port opening on the router, and you will get Windows 10 home remote desktop alternative through the internet to your particular computer.

B. Establishing A Remote Desktop Connection Using The Remote Desktop App

When you have finished setting up your computer and the router, you will be able to establish a windows 10 remote access connection with the Remote Desktop app.

If you do not have the app installed first of all proceed to install the remote desktop app. To download it and install, here, I am describing the entire process for your convenience.

Step 1: Visit the Remote Desktop app page and select the install or get an option.

Step 2: Now go to the Start menu and get the app launched.

For connecting to the computer remotely, follow the steps provided below:

Step 1: Open the Remote Desktop app and hit the add option. Then add PC to the app.

Step 2: Give the IP address of your PC you wish to connect to. Next, give the proper User account to sign into the remote PC.

Step 3: Now enter the other data properly like name, additional settings, and save the information.

Then under the Saved Desktops section, select the Connection To Commence A Remote Session.

Step 4: First of all, verify the Don’t Ask About This Certificate Again option and hit the connect option.

When you have finished configuring properly, you can connect the computer remotely. In case you wish to disable the session, proceed by closing the window and then clicking the Disconnect option.