What To Do If Wireless Network Is Not Showing Up?

In today’s world of technology, a Wi-Fi connection is the most standardized protocol, and you cannot even think of a day without the internet!

The Wireless network comes with a host of fresh opportunities and the continuous boom in the field of technology demands that the Wi-Fi should always keep up.

But sometimes you encounter the most annoying situation just in the middle of your important project when the Wi-Fi network is not showing up!

When The Wi-Fi Does Not Show Up?

Table of Contents

When the Wi-Fi network is not showing up, check your network drivers first. You may need an update for that. Also do not forget to check your router or the network configuration. These causes may trigger the issue.

Make sure that the Wi-Fi network is enabled properly by checking the Settings app.

By making a few alterations you can easily access the network at your home and solve the related problems. Through this article let us explore a few ways to do it.

Solution 1: Using Command Prompt

According to users, if your home network won’t show up at all, the problem might be related to your registry.

Several users found a solution, and to fix the problem, you need to remove certain entries from your registry.

Some users reported to easily fix the problem when the wireless network is not showing up, with the help of Command Prompt.

You can run a few commands to resolve the issue very effectively. When you remove a few entries from the registry and perform a registry tweak you can find a steady remedy.

Let us follow the steps to commence the task:

Step 1: Commence with Elevated Command Prompt. You may choose to select windows + X key and then choose Command Prompt to run it as an administrator.

Step 2: You are free to use the PowerShell (Admin) instead.

Step 3: Now enter the following commands:

reg delete hkcrclsid(988248f3-a1ad-49bf-9170-676cbbc36ba3) /va /f

netcfg -v -u dni_dne

Step 4: After you have finished the above step, make sure to check whether this has helped you to resolve the issue with your Wi-Fi.

Solution 2: Checking For The Wi-Fi Drivers Updates

When you are facing Wi-Fi is not showing up, check whether your Wi-Fi drivers are updated.

Your drivers may need an update immediately and that is why you may encounter this issue and few more troubles may pop-up. To update your drivers, I am providing you a complete guideline to execute the process. Follow the steps:

Step 1: First of all, get your system connected to the Ethernet cable. Then you need to search for the required model you are using. Also, make sure to Download the Wi-Fi software.

Step 2: Then visit the website of the manufacturer and from there you need to download the latest driver required as per your model.

Step 3: Then proceed with the installation of the driver and check whether it has helped to get rid of the problem.

Step 4: Most of the drivers have a built-in technique. You can do it manually, but it may seem a bit tiring job to download the drivers manually. So, remember to check the specific model of your device.

You may also take the help of a third-party tool for downloading and installing the drivers instantly.

Solution 3: Checking For Required Services

If you are still muddling with the WiFi issue, make sure you check whether the necessary services are running.

The problem may get triggered if specific services fail to run as your system is fully dependent on those services.

Follow the below-mentioned steps to execute the process:

Step 1: Hold the Windows Key and then press R to open the Run Dialog Box.

Step 2: When the Run box appears, type MSC, and hit the Enter button. Next press OK to confirm.

Now check whether these following services are running:

Windows EventLog

Remote Procedure Call (RPC)

Windows Update

In case you detect any of the mentioned services is not running, right-click on that particular service and select the Start button from the menu.

Solution 4: Logging Out Of Windows Temporarily

Just try logging out of the windows temporarily if you are still facing a problem with the WiFi connection.

You may try this handy workaround to resolve the issue. For this log out of the Windows and then select your WiFi network connection.

Follow the steps mentioned below:

Step 1: Select Windows Key + L. This will enable you to log out of Windows.

Step 2: Then from the bottom right corner, choose the Wi-Fi Icon. After that select the Wi-Fi Network.

Step 3: Next revert back to the Windows. Now check your Wi-Fi connection. You may have to repeat this process every time you face the Wi-Fi issue.

Solution 5: Check That Your Wi-Fi Network Is Enabled

Check whether the network connection is Enabled. For this, we recommend you check the Settings.

This is a simple process which you can easily execute following the below-mentioned steps:

Step 1: Go to the Settings and when you get the app opened, move on to the Network & Internet option.

Step 2: From the right panel, scroll down to find the Network and Sharing Center.

Step 3: After you are in the Network and Sharing Center Window, choose Change Adapter Settings from there.

Step 4: Now, choose your Wi-Fi connection and then right-click on it. Select Enable to confirm.

After the whole process gets completed, check whether the network not showing up issue is solved.

Solution 6: Install The Latest Updates

This is the easiest step you may apply to solve the issue. Just run Windows Update and check for all the latest available updates for your Windows.

Some users have reported that after installing them all, their problem with wireless network is not showing up issue was resolved.

All you need to do is press Windows Key + R and type settings: windows update. Then hit the Enter button to finish the process.

Or you may automatically get the latest Windows 10 updates installed from Settings. You will find an option to Check For Updates there as shown in the image below:

When you update the latest version available, you will be able to combat other technical glitches too.

Solution 7: Check The Frequency

2.4GHz is the older wireless standard whereas 5GHz is the new version. If your device is older it may have the older standard and the device may not be supporting the 5GHz one.

For the proper configuration, follow the instruction provided in the manual.

If the router does not support the new standard then make sure the problem is related to something else.

Solution 8: Check The Wi-Fi Channel

Your Wi-Fi channel may be another reason for Wi-Fi network is not showing up problem.

For broadcasting, each wireless network uses a particular channel. If you have multiple networks, you may fail to detect your Wi-Fi network.

To combat this given circumstance, we suggest you change the Wi-Fi channel. For this go to the configuration page of the router and after you are in the Wi-Fi Settings, proceed to change the channel.

Check whether the channel you are selecting is not occupied by the other networks. Analyzer software may help you in choosing a suitable channel for you.

Sometimes you get automatic channel changes. And that may cause some issues. When you set the channel to a particular value, you get to resolve the issue more effectively.