Windows 10 critical service failed issue is a common problem on Windows 10 soon after you boot your system.
This error does not appear for once, but one might get into the loop of BSODs by this critical service failure. Sometimes HP’s laptops are known to face this issue.
Besides, you may see your desktop freezing and displaying a bunch of messages while starting a new program or ending it. Often you get stuck in this error and cannot get to the login screen.
What Triggers Critical Service Failed Loop Bluescreen Error?
This blue screen of death with Windows 10 critical service failed message is a common issue that may occur due to some malware issues.
Outdated device drivers, the conflict between similar programs, defective Windows update files, or wrong allocation memory may trigger the issue.
Sometimes bad sectors present on Hard Disk may also be the reason for windows 10 critical service failed message.
Through this article, we will provide you some workarounds to get rid of the problem.
Solution 1: Use Windows Install Media To Repair Windows 10
You may use Windows install media to repair Windows 10 when you continuously encounter the blue screen of death error.
To accomplish the process, you’ll need a bootable USB or DVD with Windows 10. Follow the below-mentioned process:
Step 1: First we recommend you to boot your system using the Windows 10 USB or DVD. Now Instead of installing Windows 10, choose Repair.
This way your hard drive will receive a thorough scan and fix the probable error.
Step 2: After the process gets completed, give your computer a fresh restart. Check whether your problem is solved this way.
Solution 2 – Try System Restore From Safe Mode
To combat the critical service failed in windows 10 issue, perform a system restore from safe mode. This will help you solve the problem.
Just follow the steps to commence the procedure:
Step 1: When your computer restarts for a few times, you will find the Boot Options screen. From that screen, you need to choose Troubleshoot.
Step 2: Now, click on Advanced Options and then move on to Startup Settings.
Step 3: Next click the restart button and wait for your PC to restart. As your computer restarts, a list of options will be displayed. Then Press F4, F5, or F6 to enter into the Safe Mode.
Step 4: When you are in the Safe Mode, type System Restore into the search bar and run the System Restore tool.
Use this System Restore tool to restore your computer to an earlier state.
Solution 3 – Clean Reinstallation Of Windows 10
You can always try a clean reinstallation to solve many problems related to your system. Issues that raise Blue Screen of Death are critical to combat with.
Previously, the reinstallation process was long and tiring, but now with Windows 10, it has become much easier to access. You will be needing the installation drive or a DVD.
Approximately the whole task will get accomplished within an hour or so to properly install Windows 10 from a scratch.
Some additional configuration changes will take more time, but you can also commence it afterward.
Here I am mentioning the process for a clean reinstallation of Windows 10:
Step 1: First of all, download the Media Creation tool on an alternative system. Now, insert the blank DVD or plug in the compatible USB flash drive.
Step 2: Your next step is to run the Media Creation Tool. Then select Create installation media for another PC option and press Next.
Step 3: You are supposed to choose your preferred language, architecture, and edition and then click Next.
Step 4: Now, select your version and USB flash drive or and move on to Next. Once you are done with the setup download, we advise you to either create a bootable USB drive or burn it to DVD.
Step 5: Finally, restart your system and then press F10, F11, F12 to open the Boot menu. From there select the USB flash drive or DVD-ROM as the primary boot device.
Step 6: Now, select any key to boot and start with the installation process. After you finish the process check whether you could resolve the problem.
Solution 4 – Refresh Windows 10
You may use this method to resolve the critical service failed loop error. In case you have installed any third-party software, refreshing Windows 10 will remove that.
One thing we need to mention here is it will save your files and settings. So before doing this, we advise you to take a backup for safety.
The procedure is mentioned below. Please go through the steps:
Step 1: When your Windows 10 restarts for a few times, you will see the Boot Options screen. From there, select Troubleshoot.
Step 2: Now choose to reset your Computer. Remember to select the Keep my files option.
Step 3: When the process is running, you will be asked to insert Windows 10 USB or DVD, So, we advise you to keep this handy.
Step 4: Now, select the version of Windows you need to refresh and then press the Reset button. Wait for a couple of minutes to allow the process to get completed.
Solution 5 – Reset Windows 10
If none of the above-mentioned methods proved to be fruitful for you to resolve the critical service failed in windows 10 issue, try resetting your Windows 10.
Step 1: As we have mentioned earlier, from the Boot Options, select Troubleshoot.
Step 2: Then choose to reset your system but this time you are supposed to choose to Remove everything.
This process will remove all your files and folders from the hard drive partition where you had installed Windows 10. Hope this way your issue with the blue screen of death gets resolved.
Wrapping Up
Here you are! Hope by now you are able to find out how to solve windows 10 critical service failed error.
For any related issues feel free to intimate us in the comments section provided below or you may shoot us a mail. We are always eager to receive feedback from you.