The procedure entry point error message can embarrass you while running your favourite applications or games.
The missing .dll files or software bugs often lead to this tricky issue.
This issue not only affects Uplay application but also prevents other applications from running.
What Causes The Procedure Entry Point Error?
The main cause of The procedure entry point error may be a corrupted dll file or other configuration files or drivers.
You may have to either replace the dll files or perform a system restore to resolve the issue. Sometimes, reinstalling or updating to the latest version can solve the issue.
Here, I shall explore an extensive guide when you are receiving a Uplay procedure entry point error.
Solution 1: Reinstall Uplay Application
You usually encounter the procedure entry point error message when trying to start Uplay. Often when you remove Uplay and delete all the files from the directory, your problem gets solved.
Sometimes a virus or malware may be the reason for the error. So, you may remove them as well to get rid of this problem. Follow the steps to manage the task successfully:
Step 1: First and foremost, one to do is – turn off your Antivirus completely.
Step 2: Now, reboot your PC. When your PC restarts, check that the antivirus disabled.
Step 3: Delete Uplay.exe from game folders. Now, Reinstall Uplay.
Step 4: After you finish reinstalling it, turn your antivirus back on and check whether the problem is solved.
Solution 2 : Rename The Libcef.Dll.Old File To Libcef.Dll
Your libcef.dll file may be the reason if the procedure entry point could not be located in the dynamic link library. The name of this file may change due to some reason and if the name is incorrect it may give you errors and you will not be able to enjoy your Uplay service.
Some users suggested renaming the file to combat the issue. Follow the steps to do so:
Step 1: Navigate to find your libcef.dll.old file in the Uplay installation directory.
Step 2: Once you locate the file, rename it. First, reveal file extensions by clicking View and checking File name extensions.
Step 3: Now, right-click libcef.dll.old and select Rename it as libcef.dll.
Step 4: Now, if a warning message appears, click Yes. Hopefully, this solves the issue.
Solution 3: Repair The Visual C++ Packages
If you are facing the procedure entry point error, check the. May applications depend on these to perform properly. Repair the Visual C++ Redistributables to fix the issue.
If you again encounter the same issue, go for reinstallation. Make sure you install multiple versions and not just the latest one.
Step 1: Press Windows Key + S to open the control panel. Choose
Step 2: Now go to Programs and Features. From the list of all installed applications, choose Microsoft Visual C++ Redistributable and click Change.
Step 3: Then select Repair from the menu and follow the onscreen instructions.
Solution 4 : Launch Your Game With Steam
The procedure entry point error maybe first make sure that Uplay is not running in the background. Close it completely and then start games from Steam as a workaround until you find a better solution.
Here we provide a guideline to do this:
Step 1: Press Ctrl + Shift + Esc to open Task Manager.
Step 2: Now, go to the Processes tab and look for the Uplay process.
Step 3: Right-click it and select End task. Remember to check if the Uplay process is still running. If so, right-click it and choose End task from the menu.
Step 4: Then download Uplay again and re-install it. You may Download the Uplay setup file and run it. You should not run Uplay at the end of the installation. Then start Steam and launch your game.
Solution 5 : Remove Your Graphics Card Driver
You may encounter the procedure entry point error because of the graphics drivers. Remove the driver and update it to check whether you can fix the issue effectively.
Just make sure not to reinstall the same version that is giving you errors. To completely remove your graphics card driver use a third-party tool that will automatically remove your graphics card driver.
Step 1: Press Windows Key + X to open Win + X menu and select Device Manager .
Step 2: Look in the Display adapters section and find your graphics card driver. Now, right-click it and click the Uninstall device.
Step 3: Check Delete the driver software for this device and select Uninstall.
Step 4: Restart your PC after you have accomplished the whole procedure. Now, Windows will install the default driver. Check whether your problem is solved.
Solution 6 : Disable Windows Defender
Go for disabling your Windows Defender and reinstall your game to check uplay procedure entry point error.
You may easily do this following the steps mentioned below:
Step 1: Disable a third-party antivirus tool installed and disconnect your PC from the Internet.
Step 2: Now press Windows Key + R and enter gpedit.msc. to start Group Policy Editor. Hit the enter button to run it.
Step 3: Look at the left pane to find Computer Configuration > Administrative Templates. >
Step 4: From there, move to Windows Components > Windows Defender. Navigate and double click on Turn off Windows Defender Antivirus.
Step 5: Choose Enabled and select on Apply. Hit the OK button to save the changes.
Solution 7: Perform A Registry Tweak
If you cannot find Group Policy Editor on Windows, you can disable Windows Defender by modifying your registry. Though be extra cautious while performing this task as it might prove to be a bit dangerous.
To do it, follow these steps:
Step 1: Press Windows Key + R and enter regedit. Press Enter or click OK to open Registry Editor.
Step 2: Now find HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\windows Defender
Step 3: Double click the DisableAntiSpyware key. If you cannot find the key, create it. Right-click the space and choose New.
Step 4: From there, select DWORD (32-bit) Value. Enter DisableAntiSpyware. Open its properties by double-clicking the DisableAntiSpyware DWORD.
Step 5: Set the Value data to 1 and finally click OK to save the changes.
Solution 8: Disable Your Antivirus Software
The problem may occur due to the antivirus software while running certain games. You are recommended to temporarily disable your antivirus and check if it fixes up the problem for the time being.
You may follow this simple workaround to remove this. Any third party antivirus may lead to the procedure entry point error. So, remember to perform this task whenever you face this issue.
Solution 9: Install The Latest Updates
If you are receiving the procedure entry point error message frequently, instantly go for updating your Windows. Windows 10 automatically installs the necessary updates by default, but sometimes you may need to perform it manually if missed an important one.
Follow these steps to do so:
Step 1: Open Settings and navigate to the Update & security section.
Step 2: Now click on Check for updates. Windows will now check for updates and download them automatically and Windows will install them as soon as your PC reboots.
Solution 10: Copy The Steam_api.Dll File
The Uplay entry point error message may appear when the steam_api.dll file is missing.
To fix the issue, copy the missing file to the Gmod server directory. You may try this simple process by following these steps:
Step 1: Visit the gmodserver directory on your PC.
Step 2: Now navigate to the bin folder.
Step 3: Search for steam_api.dll file and copy that file.
Step 4: Then go back to gmodserver directory and paste the steam_api.dll file in that directory.
Step 5: Now your problem should be solved and you’ll be able to run Gmod server without any further issue.
Solution 11: Rename The dxgi.dll file
When you are trying to use mods with certain games, this tricky error may appear. The main cause for this issue is dxgi.dll file, and you will have to find and rename that file.
Step 1: Visit the game’s installation directory and look for dxgi.dll file. If this .dll isn’t there, move on to C:\Windows\System32 directory. Find out the dxgi.dll and copy it to the game’s installation directory.
Step 2: Now, right-click dxgi.dll and choose Rename from the menu bar. Go for Renaming the file from dxgi.dll to d3d11.dll.
Step 3: After renaming gets completed, try to restart the game and check if the problem persists.
Solution 12: Change The System Variables
Some users reported that the procedure entry point could not be located in the dynamic link library while starting DWG Viewer or DWG TrueView software.
When you’re using these tools, fix the problem simply by changing your system variables:
Step 1: Press Windows Key + S and enter advanced. Click View advanced system settings.
Step 2: Select the Environment Variables button.
In the System variables section, find Path and hit the Edit button.
Step 3: If C:\Program Files\Common Files\Autodesk Shared isn’t available on the list, add it. Click a space on the list and type C:\Program Files\Common Files\Autodesk Shared .
Step 4: Click OK to save the changes.
Closing Words
Throughout the article, we have tries to provide solution when the procedure entry point could not be located in the dynamic link library. Just apply them to find the most suitable one for you.
For more related issues, intimate us in the comments section provided below.
Or simply uninstalling and reinstalling works just fine. Worked for me.