Many users have reported the Kernel Mode Trap error while operating on their Windows PC.
In this case, the system crash can result in the entire shutdown of your PC.
If you are facing such a problem, then go through the article to find efficient solutions.
Let’s get started!
Also read: Fix: Driver Verifier DMA Violation BSOD Error
What Causes The Unexpected Kernel Mode Trap In Windows 10/11?
Here are some of the possible causes for unexpected Kernel Mode Trap error:
Faulty RAM Module: This generally happens when the RAM generates read and write errors. Whenever this happens, the PC displays a blue screen error, and the device shuts down abruptly or freezes.
Corrupt Device Drivers: If the drivers are misconfigured, outdated, incompatible, or corrupt, then this unexpected Kernel Mode trap error can occur.
Updating Windows: This unexpected error can happen while upgrading from an older to a newer version or even a downgrade from a newer to an older version.
Damaged Registry or System Files: Damage or corruption to the system files can also be a probable cause for Kernel error.
Hardware Failure: Hardware failure is the most common cause. Mismatched hardware components can be a cause of this error
How To Fix The Kernel Mode Trap Error?
There are a few effective ways by which you can fix the Kernel Mode Trap error. Simply follow the solutions given below to do it.
Boot Windows In Safe Mode (Preliminary Step)
If you cannot boot Windows normally, then try to boot in Safe Mode first.
Follow the steps to enter Safe Mode:
- Restart your PC 3 consecutive times using the Power button. On the 3rd failed boot, your PC will boot into Advance Startup Recovery menu.
- Select the Troubleshoot option.
- Now, click on the Advance options and select Startup Settings.
- Finally, click on the Restart button and press the F5 key on your keyboard to enter Safe Mode with Networking.
1) Perform System Restore
If you had created a Restore point before the Kernel Security Check Failure error, then reverting to it can fix the problem.
Follow the steps mentioned below to do restore a system restore point:
- Type Control Panel in the Start menu and go to the Recovery section.
- Select Open System Restore and click on the Next option after selecting a preferred Restore point.
- Finally, click on the Next option and then Finish. Check if this has fixed the problem. If not perform an SFC scan.
2) Run SFC Scan
Performing SFC Scan can help you to repair the Windows System Files.
The corrupted or missing files can be the reason for the Kernel Security Check Failure BSOD error.
Check if the issue is fixed or else go to the next solution.
3) Run Chkdsk
If SFC Scan fails to fix the problem, then run a Chkdsk command. This will help in identifying the damaged sector or any malfunction of your hard drive.
Follow the method below to do so:
- In the Windows Start menu, write CMD in the Search box and select the first option.
- Now, right-click on it and click on Run As Administrator.
- Now, enter the following commands in the Command Prompt Window:
“chkdsk C: /f /r /x”
- Finally, press the Enter button to run the command and wait till the scan gets completed.
- Restart your PC and if the error persists, reset your hardware.
4) Reseat Your Hardware
The unexpected Kernel mode trap error is related to drivers and system memory.
You can reseat the various hardware components in your PC like the RAM modules. Also, clean any dust inside your CPU.
Dust is the nemesis of hardware components. Carefully blow the dust out of it to add years to your hardware’s life span.
5) Update Faulty Device Drivers
Outdated drivers can also cause errors. So, update your drivers and this can fix the problem.
This is how you can do it:
- In the Start menu search bar, type Device Manager.
- Go down the list and check for a yellow mark beside the device. Update the device drivers following this guide.
6) Install Latest Updates
You can install the latest updates to fix the Kernel Mode Error trap.
Here is how you can do it:
- Click on the Start button and type Settings.
- In the Settings app, navigate to the Update and Security section.
- Next, click on Check For Updates
- Now Windows will check for available updates. If any updates are available, then Windows will download them and install them in the background.
7) Run Memory Diagnostics
Memory corruption can be another cause of Blue Screen of Death errors. Running the Memory Diagnostics can fix the error.
Here is how you can do it:
- Press the Windows key +R together to open Run.
- Type mdsched.exe and press Enter.
- Next, click on Restart Now and check for problems.
- Now, Windows will check the memory automatically. Wait till the testing is complete.
After the testing is done, Windows will restart.
8) Check Your RAM
Faulty RAM is a very common issue; you can detect it easily by testing your RAM.
You can do it by simply removing the module from your PC one by one.
But make sure to be very careful while doing so. You can take professional help if you are not confident enough to handle it.
Clean the RAM and reset it. If this could not fix the problem, you may need to replace the RAM.
Related: Fix: Driver Verifier DMA Violation BSOD Error
Wrapping Up
Let us know which of the above methods helped you to get rid of the Kernel Mode trap.
Also, feel free to comment below in case of any doubts or queries.