The TP-Link router not working means that you have lost access to the internet, and to sort this issue you need a bit of patience and a systematic approach.
In this article, we will unravel the effective solutions and ensure your internet stays as seamless and reliable as it should be.
So, let us dive straight into the troubleshooting steps that will help you to get your network back up and running.
Also, read: How To Control The LED Lights On Your TP-Link Router And Enable The Night Mode Feature?
TP-Link Router Not Working [Quick And Easy Ways]
If your TP-Link router isn’t working, then it can be frustrating, so here we have discussed a few troubleshooting steps that will help you to identify and resolve the issue.
1. Check Connections
When the TP-Link router is not working, first of all, check the connections. This should be the first troubleshooting step when your router is not working.
Ensure the router is plugged in properly and the power light is on.
Make sure all Ethernet cables are securely connected to the router and your devices.
Check for faulty power outlets, as they can sometimes cause connection issues.
2. Restart Devices
Restarting devices will refresh the entire connection and clear the issue that both the routers and modems are experiencing.
It will refresh the router’s software and then re-establish connections between the devices and clear the interference or congestion.
All you need to do is unplug the router, wait for 10 seconds, and plug it back in.
Restart your computer or any other device connected to the router.
3. Check Wireless Signal
Checking the wireless signal is a crucial step that will help you determine whether the issue lies with the router.
Try adjusting the router’s antennas to a 45 degree angle and then connect a device directly to the router using an Ethernet cable.
4. Access Router Settings
Accessing the router’s settings will allow you to directly view and modify the configurations that are causing problems with the network and will also optimize the network performance and prevent future issues.
Here’s what you need to do:
- Open a web browser and enter the router’s IP address to access the web-based utility.
- Navigate to Advanced Settings. Then select Status to check the internet IP address.
- If it shows 0.0.0.0, there might be an issue with the internet connection.
5. Update Firmware
Updating the router’s firmware is another step that will help you to diagnose the issue, and for that, you need to follow these steps:
- Connect to the router via a Wired or Wireless connection.
- Then open a web browser and enter 192.168.1.1
- Next, log in with your TP-Link ID or password.
- When the latest firmware update is available for your router, the update icon should display at the top right corner of the page.
- Click on the icon and the device will reboot automatically once the update is complete.
6. Reset Router
If everything fails, perform a factory reset by pressing and holding the reset button on the router for about 10 seconds. Release the button and wait for the router to reboot.
You should see all the lights flashing, and then they should turn off. Some of the lights get turned off slowly during the process.
Once the router reboots, it should be reset to its factory defaults. You need to re-configure the router after re-setting it.
7. Contact Support
If the issue persists, contact TP-Link technical support with your router’s model number, hardware version, and firmware version for further assistance.
Final Words
So, there you have it! Follow all the above troubleshooting steps and resolve or identify all your TP-Link router issues and restore connectivity in a short period.