Windows have various built-in troubleshooters that are capable of repairing the problems automatically. But sometimes the startup repair couldn’t repair your PC.
Most of the Windows users rely upon windows 10 automatic repair loop and it’s unfortunate in some cases when this built-in repair cannot fix the problem.
Through this article let’s explore some ways to solve the problem.
What To Do When Startup Repair Couldn’t Repair Your PC?
Solution 1: Troubleshoot in Safe Mode
There are several useful commands in Command Prompt which you should try while in Safe Mode to fix the Windows 10 automatic repair loop.
The error message may have been caused by a faulty system file or driver. If you scan in normal boot, it may not identify them so, you need to perform the task in safe mode.
Step 1: First you need to Reboot your PC and as the boot screen appears, press the F8 key. If you find somehow the key is not working, reboot your system again and this time press the F5 key.
Step 2: This will open the Windows Advanced Options menu, and this will enable you to choose several options to boot your computer.
Step 3: Now, boot into Safe Mode using Command Prompt. When the Command Prompt opens, enter the commands below to verify the Windows image for errors (DISM) and to find out whether there are any missing or broken files (SFC):
- DISM /Online /Cleanup-Image /RestoreHealth
- sfc /scannow
After you enter the commands, allow them to run the process without any interruption. Don’t perform any restart or shut down process in between.
Solution 2: Troubleshoot Using Command Prompt
The Automatic Repair deals with startup issues and it can be might be used to deal with your boot to solve this problem when startup repair couldn’t repair your PC.
With the help of Command Prompt, you may easily fix up the problem. Let’s see how we can do this by following the steps:
Step 1: Click on the Power button. Hold the shift key and click on Restart to enter Boot Options.
Step 2: Now select Troubleshoot and then move on to the Advanced options. Next press Command Prompt.
Step 3: Enter the following commands now. Make sure to press enter after each command 5to run it.
- exe /rebuildbcd
- exe /fixmbr
- exe /fixboot
This process fixed up the problem for most of the users. You may check your disk with the help of the below mentioned command:
- chkdsk /r c/d
Make sure you mention the proper letter ‘c’ or ‘d’ according to your drives. In case you want to recheck your PC’s drive letters, you can verify them in Command Prompt by the following commands and remember to click Enter after you type each one.
- diskpart
- DISKPART> list volume
These commands will display a list of your hard drive partitions so use the letters equivalent to them in the chkdsk.
Solution 3: Delete The Corrupted File Causing The Issue
You may find some of your files got corrupted and hence causing the issue with your system’s Automatic Repair Too. If the file causing the error is not a system file, you will be able to identify it and remove it easily.
Follow the steps:
Step 1: Go to the boot options as mentioned earlier. As the Boot menu opens, navigate to Troubleshoot and then open Advanced Options. From there visit Command Prompt.
Step 2: Type the following commands into the Command Prompt window:
- cd WindowsSystem32LogFilesSrt
- SrtTrail.txt
The file causing the problem will open immediately and find the below mentioned a message:
- Boot critical file ___________ is corrupt.
Step 3: Proceed to delete this corrupted file after it got identified from your Computer unless it’s a system file you may take the help of Google search should to clear any doubt.
Step 4: To delete this file, use Command Prompt to navigate to its location and then remove the file by using the Del command and the name of the file next to it, divided by a single space.
del error file.sys
Step 5: Now restart your device and uninstall the program to which the file belonged to. Hope this will resolve the issue. Make sure you check it after finishing the entire process.
Solution 4: Disable Early Launch Anti-Malware Protection
This is a remarkably easy solution, but some users have complained that before they could disable the option, they got bugged. In order to accomplish the process properly, follow the given workaround properly:
Step 1: Visit your Windows login screen and press the Power button. To enter Boot Options, hold the shift key and then press Restart.
Step 2: After the Boot Menu opens, go to Troubleshoot and open Advanced Options.
Step 3: Now go to Startup Settings to restart and boot. Now you will be provided with a number of options.
Step 4: Next to the Disable early launch anti-malware protection option, select the number, and then restart your system.
Solution 5: Fix Your Registry Issues
When you encounter some Registry issue, they are really hard to handle. You always need to be extra cautious when you change anything there as this may cause permanent damage to your system.
Though restore your registry to its previous state using a copy of the registry Windows generates itself. Follow these steps meticulously:
Step 1: In the Advanced options in Troubleshoot screen, open Command Prompt and enter the following command to run
- copy c:\windows\system32\config\RegBack* c:\windows\system32\config
Step 2: A message will appear asking whether you want to overwrite the existing files, select to overwrite the files, and then hit the Enter button.
Step 3: Now, after finishing this, Restart your computer and check if the problem got the cure.
Solution 6: Disable Automatic Startup Repair
Sometimes you may have happened to turn on the Automatic Repair feature and then it is creating issues while you are using your computer.
It is recommended to disable it from automatically getting started to get rid of the faulty Automatic Startup Repair tool. Follow the steps to disable Automatic Startup Repair:
Step 1: Open the Boot Menu and navigate to Troubleshoot >> Advanced Options >> Command Prompt.
Step 2: Now enter the following command and do not forget to press Enter after you finish typing the same:
- bcdedit /set {default} recovery enabled No
Step 2: After you have finished, Restart your device and check to see whether this solves the problem with the windows 10 startup repair tool.
Solution 7: Fix Your Automatic Repair Tool Using A Windows 10 ISO File
You may use Windows 10 ISO file to repair your Windows 10 automatic repair loop. Use to boot it into Recovery mode and then start Automatic Repair from there.
Follow the workaround provided below:
Step 1: First of all, you will have to download Windows 10 ISO. Now create a Media Creation Tool to open Automatic Repair.
Step 2: Next Download and burn Windows ISO. Now follow the instructions from this Microsoft’s page.
Step 3: Insert an in your PC and restart it. Press any key to boot from DVD/USB as per the instruction given.
Step 4: Now the Install Windows page will open. Select the Repair your computer option and this will open the Windows Recovery Environment.
Step 5: When you find that the Windows Recovery Environment is ready, choose to Troubleshoot. Next, go to Advanced Options and select Automatic Repair.
This will open Automatic Repair from your DVD or USB drive and solve the problem.
Solution 8: Remove all the external devices from your PC
Adding or installing some new hardware to your system may cause system instability or give error messages like – startup repair couldn’t repair your pc.
This issue may also be caused by your hard drive or RAM. Let’s explore the reasons with the help of the following procedure:
Step 1: Remove all the external devices from your PC except the mouse and the keyboard. Check whether the problem is solved.
Step 2: Then you are free to reconnect the devices one after the other to identify from which the problem is getting generated.
Step 3: Remove your RAM stick and boot your computer. If you own more than one memory stick, repeat the process and replace the faulty one.
Step 4: Remove your external storage and then check whether this solved the issue. Replace and repair any device that is faulty and resolve the issue at once.
Solution 9: System Refresh or Reset
If no other procedure helps, try this. Refresh your Windows 10 installation or go for a complete reset of your system.
You can perform Windows 10 refresh process without hampering or losing your files. All your important documents will be fully intact.
Step 1: Go to Settings and open Update & Security. From there open the Recovery sub menu.
Step 2: Under the Reset, this PC option select Get started button. Then you are required to meticulously follow the instructions given on-screen.
Remember to take a backup of every data before to commence this process.
You may also choose the bootable Windows 10 ISO media to commence with a clean version of Windows 10. But take a note that you will not be able to access all your files and programs after that.
Wrapping Up
So, here you are! Please let us know whether this article proved helpful to you. In case of any related queries, mail us or write to us in the comments section provided below.
We always look forward to hearing back from you.
