Roku is immune to occasional hiccups, one of which is Error Code 014.30, which disrupts your viewing experience and typically indicates an issue with the device’s connection to the internet.
We will now walk you through the potential culprits of this frustrating error message and provide solutions to help you regain your Roku online.
So, let us now explore the common causes and solutions that will have you back to enjoying your favorite content in no time.
Also, read: How To Troubleshoot The Roku Error Code 014?
Potential Causes Of Getting Error Code 014.30
Below we have discussed the potential causes of the error code 014.30 are discussed below:
- Router Configuration Settings
- Weak Wi-Fi Signal
- Network Interference
- Outdated Software
- Temporary Glitches
- ISP Issues
- Network Configuration Changes
Roku Error 014.30 [Quick And Easy Fixes]
These convenient and simple fixes will help you resolve the Roku Error code 014.30.
1. Verify Your Internet Connection
The first thing you should check is your stable internet connection. Verifying the internet connection will ensure that your Roku device is connected correctly and can, in turn, communicate appropriately with the streaming services.
Visit speedtest.net to check your internet connection. If the internet speed is slow, you can contact your Internet Service Provider(ISP).
2. Restart The Router and Modem
Next, you can power cycle the router or modem. This can fix network-related issues.
Unplug the modem or router for half a minute, then plug them back.
Wait half a minute to ensure any residual electricity in the capacitors dissipates. Allow both devices to restart fully, then plug them back in.
Power on the router or modem. If you have separate devices, you can use a smart plug to restart both devices together.
3. Reboot The Roku System
If your internet connection isn’t working correctly, restart your Roku system. Rebooting will remove temporary software glitches, clear the cached data, and re-establish a fresh connection to the Network.
Doing this will ensure that the device uses the most recent network configuration.
This is how you can reboot the Roku system:
- To do that, go to Roku Settings, then select System.
- Then, Power, select System Restart followed by Restart.
- Wait until your system restarts, and then check if the issue is fixed.
4. Reconnect To Your Network
Once you have rebooted your Roku system, reconnect to your Wi-Fi connection. Reconnecting signifies that your Roku device has established a proper connection to your wireless Network with the correct settings.
This paves the way for resolving network-related errors and ensures a stable connection.
Here’s what you need to do:
- Select System, then go to Network, and then Setup Connection.
- Next, select Wireless. Let the scan complete.
- Select your Network and type the password.
- Make sure to enter the correct password.
- Once done, choose Connect to proceed.
5. Move The Roku System Closer to The Wireless Router
To improve the signal strength and stability of the Wi-Fi signal, make sure you place your Roku system within 5 to 6 meters of the wireless router moving the Roku device closer; you can reduce the distance the signal needs to travel, which will eventually result in a stronger and more reliable connection.
Move any metal objects or electronic devices away from your Roku system and wireless router. Moving the Roku closer will mitigate the impact of such interference and reduce the likelihood of dropped connections or buffering.
6. Try a Different Connection
You can also shift to a different network and see if that works for you.
If you have access to a different Wi-Fi network, switch to that. Switching to a different connection will help determine whether the problem is with your original Wi-Fi network.
You can also choose an ethernet connection, which ensures a more stable connection. Make sure the ethernet cable is properly connected and there isn’t any loose connection.
Finally, disconnect your ethernet cable from all the sources and connect it to some other device on another internet connection to check it.
7. Perform a Factory Reset
The next thing you can do is perform a factory reset. A factory reset will restore the device to its original settings and clear any software or configuration issues that might be responsible for the connectivity problems.
So, the factory reset resets the device and operates it with a stable and clean version of the firmware. Here’s how to do it:
- To do so, navigate to Settings, then head to System.
- Next, select Advanced System Settings.
- Select Factory Reset.
- Enter the number and follow as shown to finish the process.
- Wait for the device to restart.
8. Reset Connection
Resetting the connection will eliminate the potential connectivity issues that are caused by incorrect or outdated network settings.
By resetting, you can resolve temporary glitches or interruptions and ensure a stable and reliable connection for your Roku device.
- Go to Settings and then navigate to System.
- Next, select Advanced System Settings.
- Select Network Connection Reset.
- Then, choose Reset Connection.
- Wait till the process is complete.
9. Add The MAC Address
MAC address filtering, a security feature on your Wi-Fi router, can help fix the issue. Each device that can be connected to the internet has a unique identifier called a MAC address.
When you enable MAC address filtering, your router checks this list before allowing a device to connect to your WiFi network.
If your Roku device is not on the list, it will be blocked from connecting. The error message on your Roku will show its MAC address, which was not recognized by your router. To fix this, you need to:
- Access your router’s settings through the web page or the app.
- Find the section for MAC address filtering.
- Add the MAC address in your Roku error message to the list of allowed devices.
- Save the necessary changes and restart your router if necessary.
- After doing this, your Roku should be able to connect to your Wi-Fi network because its MAC address is now recognized and allowed by your router.
It’s like adding your Roku to a guest list for an exclusive party—once it’s on the list, you should no longer get the error code.
Frequently Asked Questions (FAQs)
1. What If The Roku Device Keeps Disconnecting From The Wi-Fi?
If the Roku device keeps disconnecting from the Wi-Fi, check for potential causes and restart both the Roku and the router.
2. Can I Connect My Roku To A Mobile Hotspot?
Yes, you can easily connect your Roku device to a mobile hotspot, but you must ensure that your mobile data plan supports streaming usage.
Bottomline
Now that you have the proper knowledge and strategies, you can effectively tackle the issue and restore the streaming experience quickly.
So, navigate with patience and persistence and return to your reliable companion at the earliest.