Upgrading firmware always introduces new features along with optimal performance level and enhanced security improvements.
But you need to be cautious while you update router firmware as it may also cause permanent damage to your router if not handled carefully.
As long as our router keeps us well connected, chances are that we are reluctant to updating it regularly. To ensure a better performance level, we should update it on a regular basis.
About Router Firmware Update:
When you install a router, the firmware is provided on a read-only memory chip inside it. A firmware router is meant for security and administrative controls.
You always need to upgrade it to get the benefits of the new features. Unless you update router firmware on a regular basis it, fails to block new threats.
Some new versions come with options to update automatically. Through this article we will provide you safe guidelines to update your firmware router.
Solution 1: Update The Firmware Of A Netgear Router
- If you have a Netgear router, you may update your firmware with the help of following steps:
Step 1: Open your web browser and then navigate to https://www.routerlogin.net.
Step 2: Now type admin as username and password as the password. Visit your router settings and move on to Advanced > Administration.
Step 3: Now, select the Firmware Update or Router Update option and then choose the Check button. The router will proceed to check the available updates.
Step 4: Click Yes to download and install the updates. Wait for a couple of minutes till the process gets completed. After the update process, your router will restart.
- Updating firmware on the Netgear router is a very simple procedure as you can automatically download and install it.
In order to install it manually follow the below mentioned steps:
Step 1: Visit the NETGEAR Download Center and then enter your router’s model and download the latest firmware.
Step 2: Next log in to your router by following the steps mentioned earlier. After you log in, select the Choose File or Browse option.
Step 3: Now, find out the update file and select it. After the update process starts, allow it to get completed without any interruption.
- Netgear routers also support firmware upgrade using the NETGEAR desktop genie software. In order to update your router’s firmware with the help of this software, follow these steps:
Step 1: Start NETGEAR desktop genie software and then click Router Settings.
Step 2: Type admin as username and password as the password on the login screen. Next in the upper right corner, click the right arrow and select the Router Update tab.
Step 3: Then press Next and allow the application to check for available firmware updates. As soon as a new version of firmware is available, you’ll be provided with the confirmation message.
Step 4: Press OK and wait patiently till the new firmware gets downloaded and installed successfully.
Solution 2: Access And Update A Router
You need to access the router before you proceed to update router firmware. For this, enter a specific address in your browser.
Most of the routers will provide a specific address along with the login details in their manual.
You can access the address manually by following the steps:
Step 1: Press Windows Key + X and choose Network Connections from the menu bar.
Step 2: Network & Internet window pop up now. Navigate to find Change connection proprieties.
Step 3: Scroll down and find Proprieties section. Now, locate the IPv4 DNS server and note down the IP address.
Step 4: After you got the router’s IP address, you may proceed to log in to your router and update its firmware. To update follow the instructions given below:
Step 5: Connect to your router using the Ethernet cable. Though this is not mandatory, yet we highly recommend it to get a stable connection with your router.
We should follow it to ensure that during the update process no damage is caused.
Step 6: Now, open your web browser and in the address bar type the IP address of your router.
Step 7: Next enter a username and password. From your router’s manual or from third-party sources, you can easily find the login information.
Step 8: After you log in, find out the Firmware or Router Upgrade option in Administration, Utilities, or Maintenance section. The location address may vary from router to router.
Step 9: You will now be able to see the current version of your firmware along with its release date. After that visit your router manufacturer’s website and search for the Support section.
Step 10: Find your router model and check if any firmware updates are available. If available, download them.
Many routers have a built-in option that guides you directly to the manufacturer’s website and permit you to download firmware updates for your router.
Step 11: After finishing download, extract it to your Desktop or your preferred folder.
Step 12: From the Update section, click on Browse or Choose File option. Select the router update file by double-clicking on it to start the upgrade process.
Step 13: Wait for a couple of minutes to allow the process gets completed.
Solution 3: Update The Firmware Of A Linksys Router
This procedure is very simple to update the firmware on a Linksys router. It is advised that you should connect your PC to your router using Ethernet cable. Now, follow these steps to perform the task:
Step 1: First visit the Linksys Support Site. Enter the model of your router. Then check whether a firmware update is available. Next download the update file.
Step 2: Then open your web browser and in the address bar, enter 192.168.1.1. Now, hit the Enter button.
Step 3: When the login screen will be displayed, type admin as username and keep the password field blank.
Step 4: After you log in, click on Administration. Next move on to Firmware Upgrade. Now press the Browse option.
Step 5: Now, choose the downloaded update file and double click on it. Select the Start Upgrade button and as the progress bar appears, wait for the process to get completed without interruption.
Solution 4: Update The Firmware Of A D-Link Router
If the above mention methods fail, you can go for this option to update Update the firmware of a D-Link router. This is also a simple process that you may easily apply following the steps:
Step 1: After downloading the latest firmware update for your router from D-Link’s support page, unzip it and save on a preferred location.
Step 2: Now open your browser and in the address bar enter 192.168.1.1. Type admin as username and password as password the login screen gets displayed.
Step 3: After you log in, visit the Tools tab and choose the Update Gateway option.
Step 4: Now, select the Browse option and find out the update file. As soon as you find it, double click it.
Step 5: Then press the Update Gateway button and wait till the update is complete. Remember not to close or open any tab during the process.
After the process, the router will restart itself. In a few cases, you will have to reset your router before you can use it.
To do so, press and hold the Reset button for few seconds. Make sure to configure your settings again.
Solution 5: Update The Firmware Of A TP-Link Router
To update the firmware of your TP-Link router, make sure to check its model and hardware version. It is available on the back of your device.
We also recommend connecting your device to your router using the Ethernet cable. Now, follow the steps mentioned below:
Step 1: Visit TP-Link’s website and in the Support section you will find your model. Now, select the correct hardware version and model and download the latest firmware.
Step 2: Extract the firmware file to a preferred location. Then open your browser and access 192.168.1.1, 192.168.0.1, or http://tplinkwifi.net.
Step 3: Type admin as username and password as a password as you have done earlier. Then after logging in select Advanced and then move on to System Tools > Firmware Upgrade.
Step 4: Choose the Browse or File button and navigate to find the firmware update file. Next, choose the file by double-clicking it.
Step 5: Select the Upgrade button and start the update process. Wait till the procedure gets completed else any interruption may cause permanent damage to the router.
Step 6: After the update, you will have to reconfigure your router as it might be restored to factory settings.
Hope you have already found a solution to update router firmware.
In case you have any more queries on how to update a router’s firmware on Windows 10, feel free to come up with the issues in the comments section provided below.
We always look forward to hearing back from you