How To Turn Off Hibernation In Windows 10?

Some users prefer to use the hibernate mode as it saves to the hard drive instead of saving to the RAM when one shuts down the Computer.

Hibernation enables you to resume the next time the PC gets started so nothing is lost when the power gets cut abruptly.

Besides the usage of power is nil when your device is in the hibernate mode, yet sometimes you may need to turn hibernate off in windows 10.

When Should You Turn Off Hibernation In Windows 10?

Table of Contents

When you put your computer on hibernation mode, it takes snapshots of the drivers and system files and before shutting down saves to your hard drive.

Sometimes you may prefer to turn off hibernation in windows 10 as it reserves some of the disk for its file.

In case you are having 8 GB or 16 GB of RAM, the hiberfil.sys file may consume up to 75 percent GB of the hard drive space!

That is why to restore those extra space on your hard drive as you may be low on your disk space and you may need to disable the hibernation mode sometimes.

Through this article let us discuss about the ways to disable as well as enable your hibernation mode.

1. Disabling Hibernation Mode In Windows 10

It is a remarkably simple procedure to turn off the hibernation mode on your Surface. You can easily apply this pretty easy method using your Command Prompt.

Here I am describing the process to execute Windows 10 turn off hibernate. Follow the steps:

Step 1: Go to start button and open elevated Command Prompt.

Step 2: Now type powercfg.exe/hibernate off and press the Enter button.

Now this will turn off hibernation in your Windows 10 and this process will remove the hiberfil.sys file from the hard drive.

2. Control Your Battery Usage

Instead of choosing hibernation you can configure your surface for a total shut down. It will enable you to avoid the battery drainage and restrict a multi-GigaByte file on the drive.

There are plenty of things that can drain your battery when you use you Windows 10 on daily basis.

You can check your battery saver utility and find the reasons there. Here, I am providing you some guidelines to have a control on your battery usage.

a)Lower The Brightness Of Your Display

Your display consumes a lot of the battery power. The powering up of the lights and pixels uses lot of the power and this happens from ever device you choose.

In order to conserve the battery usage we recommend you to lessen the brightness of your display than you usually use. You also have the option to adjust the light automatically and this is definitely going to help you to save the battery consumption for your system.

b)Enable the Sleep Mode

In case you are not having problem with the sleep mode or hibernation issues, you can definitely choose this option to save your battery.

Use the sleep mode whenever you take a break from your work and return back after a few while accomplishing plenty of other jobs as well! In this case setting the sleep mode is a great option.

You can select the Computer Sleep Options to enable it to rest for a rather long time period.

c)Unplug Any Plugged In Device From Your System

In case there are some plugged in devices in your system, unplug those unnecessary cords or other devices inserted in your PC.

Often we have a tendency to leave those things plugged into the Computer and this may in turn drain your battery. So, removing those devices you can check some of the battery usage easily.

d)Turn Off Your Bluetooth And Wi-Fi

Always turn off your Bluetooth or WiFi when you are not using them.

Actually, we never pay any heed to these but they always search to connect to some network when on and your device works nonstop due to these enabled features.

So, always remember to disable the Bluetooth and Wi-Fi when you are not operating the system.

e)Turn Your Computer Off When Not In Use

We recommend your o turn off your device when you not using it otherwise your computer will work continuously without any rest.

Keeping your system turned on for all the time, it wears down and may generates problems with your system afterwards that is why it is unwise to keep it on always.

3. Enabling Hibernation Mode

Turning hibernate off in windows 10 may be a good option sometimes, but it’s better if you consider it on a temporary basis rather than a permanent solution.

In order to turn the hibernation mode on follow the process that I am describing below:

Step 1: Go to the Start Menu and open your Command Prompt. Run your Elevated Command Prompt.

Step 2: Then enter: poweroff/availablesleepstates and then run the command by hitting the Enter button.

Step 3: Now you will be able to find out that the sleep states are available on your Computer.

I am providing you another option in case you cannot find the hibernate mode in the provided Menu:

Step 1: Got o the Start menu and select the Control Panel. From there, choose the Power options.

Step 2: Now select the Require a password on wakeup option as I have shown in the picture below.

Step 3: Now find the option When I Press The Sleep Button and from the available settings you can choose the hibernate option.

Thus modifying your settings you can choose hibernation as per your requirement. Save you changes and close the window.

After that you will get the hibernation mode on the Power menu with just a click of the Windows key.

In order to set the hibernation manually follow the process described below:

Step 1: From your startup Control Panel, go to the Advanced options now proceed to change the Advanced Power Settings.

Step 2: Select Sleep or Hibernate option. You will get option to alter the time period for the automatic hibernation in the Windows in the Battery and Plugged in option.

Step 3: After you are done hit the Apply button and then choose Okay to save the changes. So, this way you can turn on the hibernation mode manually.