Pairing the Firestick remote directly to your TV will make your streaming experience seamless and convenient. This is relatively straightforward and can be done in a few simple steps.
In this comprehensive guide, we’ll walk you through the easy steps of pairing the Firestick to your TV, which will make your streaming experience smoother and more enjoyable.
So, unlock the full potential of your Firestick remote and streamline your entertainment setup!
also, read: How To Fix The Power Button Not Turning On Amazon Firestick?
What Are The Common Issues While Pairing A Firestick TV Stick Remote?
Users encounter several issues while trying to pair a Firestick TV remote, and some of those are discussed below:
- Dead or low batteries
- Interference from other devices
- The remote is not in pairing mode
- Distance from the Firestick TV
- Unpaired remote
- Software glitches
- Compatibility issues
- Using a temporary remote
5 Easy Ways To Pair Firestick Remote To TV
The sleek, voice-enabled remote will not only control your Firestick, but it can also be paired for controlling your TV.
Here are some of the ways to do so:
1. Check The Batteries
Before you pair a new remote or an old remote with your Firestick, first make sure the batteries are fresh. Checking the batteries in your Firestick remote is crucial when it comes to troubleshooting this issue, as most of the issues are caused by dead or low batteries.
Therefore, check if you have inserted AAA batteries properly, and then you can easily eliminate the issue. Some remotes come with batteries, but if yours didn’t, you’ll need to purchase the batteries and then start using the remote.
2. Pair The Remote
The next thing that you need to do is check whether your Amazon Fire Stick is plugged into your TV and powered on.
To do that, follow the steps:
- Look for the Home button on your remote. You’ll usually be in the center and have a house icon.
- Press and hold the Home button for about 10 seconds.
- You should see a light at the top of the remote start to blink green. This indicates that the remote is trying to pair with the Fire Stick.
- If the light doesn’t blink, hold the Home button for at least 20 seconds. You may need to hold it for up to 60 seconds or repeat this process until it connects.
3. Ensure Proximity
While pairing the remote, make sure you are close enough to the TV to stay within Bluetooth range. Maintaining a close distance between the remote and the device will help you to resolve the pairing issue.
If necessary, move around to the side or back of the TV to avoid any signal blockage. If you are too far away, then the remote will not be able to connect or respond properly, which in turn will lead to frustration during the pairing process.
4. Restart The Fire Stick
If the remote still doesn’t pair, try unplugging the Fire Stick from the power source. Wait for a couple of seconds, then plug it back in.
Restarting will clear the temporary bugs or glitches that are disrupting normal functioning and will also improve the performance.
Once the Fire Stick has fully rebooted, try holding down the Home button on the remote again to pair it.
5. Reset The Fire TV Remote
If you are still having issues, you can reset the remote. Resetting can turn out to be an effective solution in case of resolving pairing issues and will also restore functionality.
Here’s how you can do it:
- Unplug your Fire TV from the power supply and HDMI input, then wait 60 seconds.
- Press and hold the Left, Menu, and Back buttons simultaneously for about twelve to fifteen seconds.
- Release the buttons and wait 5 seconds.
- Now, remove the batteries from your remote.
- Plug in your Fire TV and wait until you see the screen indicating the remote can’t be detected.
- Reinsert the batteries into your remote and press the Home button.
- When the LED indicator blinks blue, your remote is paired successfully. If not, press the Home button for about 10 seconds.
- Here you need to note that not all remotes have an LED indicator light.
To reset the Alexa Voice Remote (1st Generation), you can follow these steps:
- Unplug your Fire TV from the power supply and HDMI input, then wait 60 seconds.
- Press and hold the Left and Menu buttons simultaneously for 12 seconds.
- Release the buttons wait 5 seconds and then remove the batteries from your remote.
- Plug in your Fire TV and wait until you see the screen indicating the remote can’t be detected.
- Reinsert the batteries into your remote and press the Home button on the remote.
Your remote should now be paired.
Bottomline
Now that you have successfully paired your Firestick remote to your TV, unlock the full potential of your streaming experience and take control of your entertainment.
Enjoy smart streaming!