How To Open The Router Login Page When It Is Not 192.168.1.1

Recommendation: Click here to fix Windоws issues and optimize system performance

The router page not opening is a frustrating issue that needs severe troubleshooting, as “192.168.1.1” is the universal default for routers. Unlocking your router’s login page will give you control over your home network, and several methods exist to uncover the router’s login page.

In this step-by-step guide, you’ll learn how to find and access your router’s login page, regardless of the default address.

So, get back to managing your network like a pro, with a little patience, and dive in to decode this mystery.

Also, read: How To Create Mesh On A TP-Link Archer C80 (AC 1900) Router?

Accessing The Router’s Login Page When It Isn’t 192.168.1.1

Table of Contents

With these few steps, you’ll soon be able to locate and access the login page from any device and maintain control over your network settings.

Here’s how you can do so:

1. Check The Router Manual Or Label

If you cannot access the router’s login page, then the simplest thing that you can do is to go through the router’s manual or check the label on the router for the IP address.

Look for a physical label on the router itself or refer to the user manual for the default login details, as it can save time and frustration while you try to determine the exact ways to access the router settings.

2. Verify The Correct IP Address

Verify the correct IP address to troubleshoot the issue; if this address isn’t accurate, then you won’t be able to log in and manage your network.

This is how you can verify the correct IP address for your router by using different devices:

Search for CMD, right-click on it, and select “Run as administrator.”

Type ipconfig and press Enter.

Note down the “Default Gateway” address.
Ensure this is the IP address you are using to access the router’s address.

3. Check HTTP/HTTPS Protocol

Using the correct protocol will prevent unnecessary connection errors and will also ensure smooth access to your router’s settings.

So, check and use the correct protocol to eliminate the hurdle in accessing your router’s login page. If your router’s address is not opening, try both http:// and https:// before the IP address in your browser’s address bar.

Try these protocols and check if it is working now.

4. Change Browser

The inability to access your router’s login page can simply be an issue with the web browser that you are using, as browser compatibility issues will interfere with accessing the local IP address.

Sometimes, switching to a different web browser can help.

So, if you’re using Chrome, try accessing the router with Internet Explorer or Firefox and then check if you can open the router’s page.

5. Restart Your Router

Restarting the router is a very effective troubleshooting step due to its inability to access the login page. A simple restart will also force the router to re-establish the connections with your devices, which can resolve the network address conflicts or incorrect IP configurations.

This is how you can do it:

Turn off your router, wait for 10 seconds, and then turn it back on.
Now try to access the router’s homepage. If this doesn’t help, then reset the router.

To do this, find the reset button on your router, which might be a small hole.
Press and hold it for about 10-20 seconds to reset the router to its factory settings.
Note that this will erase all custom settings.

6. Network Adapter Settings

Misconfigured network adapter settings are responsible for this issue and can prevent you from accessing the router, thereby causing connection problems or interference with the local network.

Here is how you can do so:

Right-click on the Start button, select Run, and type ncpa.cpl and click OK.

Right-click on the network adapter you are using, Wi-Fi or Ethernet, and select Properties.
Select “Internet Protocol Version 4 TCP/IPv4 and click Properties.