WV-109146-1 is a common PS5 error code that signals a failure to connect to the PlayStation Network.
This usually appears when trying to access online features, multiplayer games, or the PlayStation Store.
While annoying, it’s often caused by temporary network issues or misconfigured settings.
Now, here’s a complete guideline on what you can do when you get such an error on your PS5 console.
Reasons Why WV-109146-1 Occurs
Here are a few reasons why this PS5 error WV-109146-1 occurs:
- Unstable Internet Connection – Slow or unstable internet connection can prevent your PS5 from maintaining a reliable link to PSN.
- PSN server Issues – PSN servers may be undergoing maintenance or experiencing outages, which block the access temporarily.
- Outdated Router Firmware – Outdated router firmware can interfere with proper network communication.
- Poor Wi-Fi Signal – Wireless interference or poor signal strength can disrupt connectivity between your PS5 and router.
- Misconfiguration in the Network Settings – Incorrect network settings on your PS5 may prevent successful authentication with PSN.
- Closed Network Ports – Closed or restricted network ports can block essential traffic needed for PSN services.
What to Do When You Experience WV-109146-1 Error on PS5
Follow the methods given below when you get error WV-109146-1 on your PS5 console.
1. Check That The Firewall is Not Blocking The PSN Connection
When you are getting error WV-109146-1 on PS5, you should check that the Firewall is not blocking the internet connection.
To check that, follow the steps given below:
- Access your router’s settings. Log in to your router’s Control Panel using your web browser.
- Find the section related to firewall rules or port forwarding.
- Verify that the following PlayStation Network ports are listed as open and allowed:
TCP:80,443,3478,3479,3480.
UDP: 3478, 3479, 49152 to 65535.
- If any of the required ports are blocked, you need to add a new rule to allow traffic on those ports.
- You can also contact your internet service provider for help.
2. Adjust DNS Settings on Your PS5
The next thing you can do is adjust the DNS settings on the PS5 console. Here’s how to do so:
- Head to PS5 Settings, then select Network, then select Settings, then Set Up Internet Connection.
- Choose your Wi-Fi network, press Options, and select Advanced Settings.
- Set DNS Settings to Manual.
Enter 8.8.8.8 for Primary DNS and 8.8.4.4 for Secondary DNS.
- Save and go back to Network, then run a Test Internet Connection.
3. Check PlayStation Network (PSN) Status
This error often shows up when PSN servers are having issues.
To check the current server status:
- Visit the PlayStation Network Status Page.
- Make sure all services are up and running.
- If there’s scheduled maintenance or a temporary outage, you’ll need to wait until it’s resolved.
4. Forget and Reconnect to the Network
Refreshing the network connection may clear temporary issues.
Here is what to do:
- Go to Settings, then select Network. Next, choose Settings then, select Set Up Internet Connection.
- Highlight your current network, then select Forget.
- Wait a few moments, reconnect to the network, and enter your password again.
5. Update Your Router Firmware
Outdated firmware can cause compatibility issues.
- To fix it, contact your internet service provider or check your router’s admin panel to see if a firmware update is available.
- Update and restart both your router and PS5 after the update.
6. Use a Wired Connection
If possible, switch to a wired Ethernet connection to avoid network errors and dropped connections.
Ethernet offers faster, more reliable speeds and is less affected by interference.
Connect your PS5 directly to your router using an Ethernet cable and test the connection again.
7. Optimize PS5 Placement
Signal interference can impact your Wi-Fi performance.
So, place your PS5 closer to your router.
Make sure there are minimal obstructions like walls or electronics between the devices.
Avoid placing your PS5 inside cabinets or behind large objects.
8. Contact PlayStation Support
If none of these methods worked, the issue might be specific to your account or hardware.
Visit the PlayStation Support page for further help.
Follow the troubleshooting steps provided by the expert team.
In the meantime, you can restart your router or modem and your PS5 console to see if that refreshes the connection.
Wrapping Up
So, that is all you need to do when you get WV-109146-1. Let us know which method has helped you fix the issue. For any further queries or suggestions, you can write in the comments section provided below.
