Echo Show Screen Has Lines Or Does Not Turn On

If you encounter vertical or horizontal lines across the Echo Show screen or if the Echo Show doesn’t turn on, you’ll be in a dilemma.

So, if the Echo Show shows any potential signs of distress, such as flickering lines or a dim or blank display, do not worry. Here, we’ll dive deep into troubleshooting steps that will help you deal with the issue.

But before that, knowing what caused the display malfunctions is crucial to restoring the Echo Show to its former glory.

Also, read: How To Turn Sunrise Alarms On Or Off On Your Echo Show?

What Could Be Causing The Line On My Echo Show’s Screen?

Table of Contents

If your Echo Show is showing screen issues, then it can typically indicate an underlying issue and those are:

Physically or Internally Damaged Screen

Loose or Faulty Display Connection
Defective Display Panel
Software or Firmware Glitches

Power Supply or Electrical Issues
Overheating
Moisture or Humidity Exposure

If Alexa Skill Is Not Working On The Amazon Echo Show, take a look at this guide.

7 Easy Fixes To Troubleshoot The Echo Show Screen Has Lines Or Does Not Turn On Issue

The patterns or lines that you have noticed on your Echo Show screen can easily be fixed with the troubleshooting steps discussed below:

1. Restart The Device

Restarting the Echo Show can help you deal with the lines or major display issues in your Echo Show.

So, when you encounter lines on your Amazon Echo Show device, restart the Alexa Echo Show device as doing that will refresh the entire system.

To restart the device, here’s what you need to do:

Unplug the power adapter from the device or the outlet and wait for about a few minutes.

Then connect the power adapter back to the device or outlet and check for the issue.

If it doesn’t turn on, move on to the next solution.

2. Use The Original Amazon Echo Show Adapter

Using a third-party or unofficial adapter may lead to display issues on your Echo Show, so ensure you are using the original power adapter for the best experience with your Amazon Echo Show.

Using third-party adapters can result in screen malfunctions and other performance issues. The original power adapter is built with the required voltage regulation and surge protection that will keep your device running smoothly.

So, to extend its lifespan, always use trusted, original accessories, and invest in the right adapter as it will help you to avoid potential issues.

3. Check Power Outlet

Checking the power outlet is essential because a faulty or inconsistent power supply will lead to display glitches. So, it is essential to check the power outlet, as intermittent power loss may lead to unexpected turn-offs.

Ensure the power adapter and power source are functioning properly. Try connecting your device to a different power outlet.

If possible, use a different cable and adapter to see if it resolves the issue. Check what works best for you.

4. Check For Software Updates

It is crucial to keep the Echo Show updated with the latest software updates as it delivers a high-quality performance and also helps to deal with the display issues.

Software updates are highly known for resolving performance issues and fixing screen glitches, so you can try to update the software using Alexa and see if this helps to fix the issue.

All you need to do is simply say, “Alexa, check for software updates.”

If you have any issues updating Echo Show, fix it and then check.

5. Adjust Brightness

Also, adjusting the brightness of the Echo Show can help you deal with the issue, as if the brightness is set too high, then it can stress the display panel.

Additionally, lowering the brightness will result in fewer visible or flickering issues on the screen.

Here’s how to adjust the brightness of the Echo Show:

Swipe down from the top of the screen and select Settings.

Then select Display.
Adjust the brightness using the slider.

You can also toggle Adaptive Brightness on or off.

6. Reset The Device

Resetting the Echo Show will resolve the stubborn screen issues, as it will clear the software glitches and also update or adjust the settings.

To reset the device, follow these steps:

Press and hold the Mute button and the Volume Down button simultaneously for about 15 seconds until the Amazon logo appears.
Follow the on-screen instructions to set up your device again.

7. Contact Amazon Support

If none of the methods work, contact Amazon Support for further assistance. They will help you to fix the issue as soon as possible.

Final Words

With proper care and effective troubleshooting steps, you can now restore the Amazon Echo Show to its functional best and continue to enjoy its function being a smart home experience.