If your ONN streaming device is stuck on a blue screen, you’re not alone. This frustrating issue—often referred to as BSOD (Blue Screen of Death)—can stem from power problems, signal interference, or faulty connections.
Fortunately, most cases can be resolved with a few targeted troubleshooting steps. Below, we break down the most effective methods to get your ONN device back up and running.
Common Reasons for BSOD on ONN Devices
Blue Screen of Death mostly occurs on an ONN device because of the following reasons:
Insufficient Power Supply – Using third-party adapters or USB ports may not deliver enough power.
Loose or Faulty HDMI Connection – A poor connection can prevent proper signal transmission.
Signal Interference – Nearby electronics or physical barriers can disrupt device performance.
Incorrect Input Selection – Your TV may be set to the wrong HDMI input.
Device Malfunction or Corruption – Internal errors may require a factory reset.
Also Read: Onn Slow Response and Lagging
Blue Screen on ONN Device
Follow the step-by-step guide to fix a Blue Screen of Death on an ONN device.
1. Check the Power Source
If your ONN device is stuck on a blue screen, start by inspecting the power supply. Always plug the device directly into a wall outlet using its official power adapter—avoid using extension cords or USB ports.
Try switching to a different wall outlet to rule out any issues with the current one. If the problem persists, test with another compatible power cable and adapter to eliminate the possibility of a faulty power source.
2. Always Use the Original Power Adapter
To ensure your ONN device runs smoothly, it’s important to use the original power adapter and cable that came with it.
Avoid connecting it to your TV’s USB port or using third-party adapters—even if they seem to work—since they often don’t provide enough power.
Instead, plug the adapter directly into a reliable wall outlet, and double-check that the cable is securely connected to both the adapter and the ONN device.
This simple setup can prevent power-related issues and help your device start up correctly.
Also Read: How To Uninstall Apps on an Onn Device.
3. Avoid Using TV USB Ports
Make sure you’re not powering your ONN device through a USB port on your TV—unless the port is specifically rated to deliver sufficient power.
Most TV USB ports fall short of the power requirements needed for stable performance.
Using them can lead to issues like lag, unexpected shutdowns, or even long-term damage to your ONN device. For best results, always use the original power adapter connected to a reliable wall outlet.
4. Check the LED Light
When you try to power on the ONN device, check that the LED light on the ONN device as well as on the monitor or the TV.
If there is no light, it may not be receiving power. In this case, try different power outlets.
5. Check for Signal Interference
Make sure your ONN device isn’t blocked or surrounded by physical objects. Barriers between the ONN and your TV or monitor can contribute to blue screen errors and connectivity issues.
Avoid placing the device behind the TV or near electronics that may cause interference—such as routers, microwaves, cordless phones, or other wireless gadgets.
If your ONN model includes an HDMI extender, use it to reposition the device for better airflow and signal clarity.
For optimal performance, try placing your Wi-Fi router closer to the ONN device to boost signal strength and reduce disruptions.
6. Check the TV Connection
Make sure the HDMI cable is securely connected to both your ONN device and your TV or monitor. A loose connection can cause display issues or prevent the device from functioning properly.
Double-check that your TV is set to the correct HDMI input—matching the port where your ONN device is plugged in.
Also, inspect the ONN device itself for any signs of damage or loose fittings that could affect the connection.
7. Factory Reset The ONN Device
If no other method could fix the issue, then factory reset the ONN device.
- Find the small reset button on your device. It’s typically located near the HDMI port or on the back of the device.
- With the device powered on, press and hold the reset button for about 5 seconds.
- While still holding the reset button, unplug the device from the power source.
- Continue holding the reset button for another 10 seconds.
- Still holding the reset button, plug the device back into the power source.
- Release the reset button when the recovery menu appears on the screen.
- Use the reset button to scroll through the options. You need to use the reset button for scrolling.
- When you reach the “Wipe data and factory Reset” option, press and hold the reset button to select it.
- From the next menu, select the Factory Data reset option again using the reset button.
- Wait till the process completes. Once the wiping process completes, select the Reboot System Now option. Once the streaming device restarts, you will be brought back to the set-up page. Now set up your device.
8. Contact Google Support
If your ONN device is still showing BSOD error, then you can contact ONN support and follow the instructions provided by the experts to fix the issue.
Wrapping Up
So that is how you should fix BSOD on ONN device. Blue screen errors on ONN devices are usually caused by power issues, poor connections, or signal interference.
By following these steps—from checking your adapter to performing a factory reset—you can quickly restore your device and get back to streaming.
If the methods helped you fix the issue, let us know in the comments section provided below. We are always eager to hear from your side.
